November 13, 2024
Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows

Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows

Posted December 27, 2011 at 12:28pm by iClarified
EnglishDutchGermanPolishPortuguese (Brazil)SpanishThaiTurkish
Instructies om de Iphone 3gs met IOS 5.0.1 Untethered te jailbreaken met RedSn0W voor Windows.
De handleiding voor Mac gebruikers kun je hier vinden:
here.

Door deze instructie te volgen kan het zijn dat uw baseband geupgrade word waardoor mogelijke softwarematige unlock niet meer werkt.custom ipsw als je een unlock nodig hebt!

Als u wilt een lagere firmware-versie jailbreakzoekt vindt je hier de juiste handleidinghere.


Stap een
Maak een folder op je bureaublad met de naam Pwnage

Download de meeste recente versie van RedSn0w hier: here en plaats deze in de zojuist gemaakte Pwnage folder. Download ook IOS 5.0.1 firmware vanaf here en plaats deze ook in de gemaakt Pwnage folder.

Pak de RedSn0w zip file uit door erop te klikken en kiezen voor uitpakken
Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows

Stap twee: (Sla deze stap over als je al draait op iOS 5.0.1 )
Verbind je iphone met de pc en start Itunes.
Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows

Selecteer uw iPhone uit de lijst met apparaten aan de linkerkant. Nu houdt u Shift en klik op de Restore -knop. Restore heeft de voorkeur omdat het niet tot een verspilde ruimte op je iPhone.
Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows

Navigeer naar de Pwnage map op je bureaublad en kies de 5.0.1 firmware ipsw. Klik op de Choose knop om doortegaan
Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows

iTunes zal je iPhone nu updaten naar de nieuwe firmware.

Stap drie
Start de redsn0w toepassing van het redsn0w map die we eerder hebben uitgepakt.
Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows

** Windows 7-gebruikers kunnen proberen het uitvoeren van de redsn0w uitvoerbare modus als beheerder in Windows Vista compatibiliteit. U kunt dit doen door rechts te klikken op het uitvoerbare bestand en Eigenschappen te kiezen uit het menu

Stap vier
Wanneer RedSn0w opent klik op de Extras knop
Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows

Kies Select IPSW vanuit het menu extra.
Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows

Selecteer de iOS 5.0.1 firmware ipsw vanuit Pwnage map op je bureablad en klik Open.
Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows

Op de vraag vertellen RedSn0w of u een nieuw model of een ouder model van de iPhone 3G hebben klik vervolgens op de de Terug -knop.
Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows

Klik op de Jailbreak knop om door te gaan.
Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows

Stap vijf
Sluit je iPhone aan op de computer en zorg ervoor dat de uit-dan op de Volgende knop te klikken
Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows

Stap zes
RedSn0w zal nu leidt u door de stappen om in DFU-modus te komen. U vindt meer informatie over de DFU-modus here
Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows

Houd zowel de Home -knop en de aan/uit knop 10 seconden ingedrukt.
Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows

Laat de aan/uit -knop los en houdt u de Home -knop vast tot RedSn0w detecteert het apparaat.
Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows

Stap zeven
Je Iphone gaat nu herstarten
Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows

Stap acht
RedSn0w bereidt de jailbreak gegevens voor
Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows

Stap negen
Selecteer Cydia in de lijst van opties en klik op Volgende .
Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows

Stap tien
Je iPhone wordt nu opnieuw opgestart en RedSn0w zal beginnen met het uploaden van de nieuwe RAM-schijf en Kernel.
Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows

Stap elf
Zodra dit is voltooid krijg je een melding dat RedSn0w klaar is. Wanneer je de iPhone klaar is met rebooten (5 minuten of zo) is deze gejailbreaked zijn met Cydia op de Springboard.
Hoe Jailbreak je iphone 3GS met IOS 5.0.1. met RedSn0W voor Windows


*Zoals gebruikelijk is een worden iPhone Dev-Team, Chronic Dev-Team, pod2g en GeoHot hartelijk bedankt voor hun harde werk en bijdrage aan de iPhone-community.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (71)
You must login or register to add a comment...
raffal0014
raffal0014 - September 21, 2014 at 11:00am
Dzięki wielkie :D
Geek4Iphone
Geek4Iphone - April 13, 2012 at 7:20am
I followed the following steps, my iphone ran many scripts and rebooted for couple of times.. Then it went to recovery mode and it didnt come out of that..I googled for coming out of recovery mode. For this i need to connect my iphone to my laptop. But after the jailbreak program ran, the laptop stopped recognizing the iphone (I tried all the usb ports)..When I went and checked the Device manager, all the drivers are in yellow color (Warning symbol). I am not able to connect any device to my laptop. Please help!!!
Nandari
Nandari - March 21, 2012 at 5:39pm
itune file down .. But. I lost my software
RudyJohnson
RudyJohnson - March 21, 2012 at 1:55am
All I can give is a BIG THUMBS UP to all of you at iClarified. The tutorial is clear and easy to follow. Thank you to the Development Team for making my life awesome. I am not sure how, but it just worked. So, I post my story in detail, and maybe someone can benefit from it. My wife traded in my dead 3GS (error 28) to Apple store with $149 for a NEW iPhone 3GS, 32G, QR203xxxxxx (January 2012, cleaned up from 'qr2030ga3ns' - refurbished?), ISO 5.0.1, baseband 05.16.05, bootloader 6.4_M3S2, Model MB718LL. She was told it is a brand new, locked 3GS iphone and can not use with another carrier, except AT&T. So, I run f0rcecast and it said it is not jailbreakable and need to upgrade to iPadBB to unlock. After searching, I found out the iphone 3GS after week 28, 2011 will not work with iPadBB, and BB 05.16.05 can not be unlocked by ultrasn0w. I was so disappointed, but thinking maybe I can just jailbreak it and use it as a Touch by following this tutorial. (Although there is another site claim to downgrade it to 4.1 and...to unlock it - in Chinese, I think it is too much work, plus lots of risk.) I run redsn0w 0.9.10b6 just like this tutorial describes (check install Cydia & unlock), and it was jailbreak. Shut it down several times and it boot without a problem. Very very happy. So, I put my T-mobile pay-to-go SIM card and it works, without running untrasn0w or anything. Wow!!! not sure what has happened. But, it work. Thank you, Thank you. The only thing I have not done is to register my iphone with Apple. I also did not try it with my sim card before JB it, since I assumed it is locked. So, maybe this iphone is a factory unlocked phone? Maybe the new Toshiba chip can be unlocked with 05.16.05 BB on the old bootloader? I also use iFaith to grab my iphone's shsh blob, thinking it will come in handy in the future, will this help? Anyway, Thank you all again for the amazing work!!!
Jack
Jack - March 26, 2012 at 10:56am
If my memory serves me correctly, because you hadn't inserted a sim prior to JBing your device it was locked to any network. I believe that your phone is now locked to T-Mobile as it was the first sim you used.
Rudy Johnson
Rudy Johnson - March 27, 2012 at 7:23am
Now after using the iphone 3GS for 1 week or so, it shows NO SERVICE. Not sure if it is 3G related problem (saw "E"-"EDGE" all the time) and I am not on a prepay minute (no data) plan. However, I did use that iphone for about a week. Try everything (you name it - reset network, airplane mode, sim in/out...), but no luck, I guess the baseband is unlockable (05.16.05) and I just got lucky to use it for a week. :(
long
long - February 5, 2012 at 9:14am
Hi everyone!! I have just faced up with one big issue with ios 5.0.1. The problem is that my phone suddenly switch off once I unplug it. Has anyone ever encountered this problem? please kindly help me!! I look forward to your solution!! Thank in advance for your kindness
peter king
peter king - February 1, 2012 at 2:32pm
I have 3gs already unlocked and jailbroken :version 4.1, new boot loader,firmware 06.15.00.What advice to jailbreak to ios 5.0.1 and keep my unlock Thanks in anticipation.
BeeVee
BeeVee - February 1, 2012 at 8:12am
Any luck on jailbreaking and unlocking my iPhone 3GS on firmware 5.0.1 with baseband 5.16.02 at this moment?
hiteshmadhok
hiteshmadhok - January 29, 2012 at 2:40pm
Hi, I tried all the steps given to jailbreak ios 5.0.1, baseband 6.15.00. Now i am getting No service. I have tried to reinstall ultrasn0w, mobile substrate, still nogo. Please help.
Miguell
Miguell - April 8, 2012 at 8:10am
Hello. Run redsn0w again and select Install Cydia, Install iPad baseband, Deactivate. Read carefully WARNING about iPad baseband!!!!! And make decision what to do. I tried on my iPhone 3GS with 06.15.00 firmware modem- works fine :)
hiteshmadhok
hiteshmadhok - January 29, 2012 at 2:39pm
Hi, I tried all the steps given to jailbreak ios 5.0.1. Now i am getting No service. I have tried to reinstall ultrasn0w, mobile substrate, still nogo. Please help.
Miguell
Miguell - April 4, 2012 at 8:07pm
Hello. You have to activate your iPhone using ORYGINAL SIM card. I`ve got the same. Make big mess in my iPhone and now I have`t got possibility to make a calls. Sad :(
Blog Commenting Service
Blog Commenting Service - April 9, 2012 at 9:13am
There are certainly a couple more details to take into consideration, but thank you for sharing this information.
Miguell
Miguell - April 9, 2012 at 10:48am
Hi. Ha - Mission completed. :) iPhone jailbreaked and unlocked . All what you have to do is make a TICK next to Install iPad baseband in redsn0w (read carefully WARNING) now I can use Cydia, Installious and make a call.
iphone3gs5.O.1
iphone3gs5.O.1 - January 25, 2012 at 9:46pm
Hello! i hope it will help you: use redsn0w_win_0.9.10b1 ,and go to "extras" go to "select ISPW" use the "iPhone2,1_5.0.1_9A405_Restore " you've used to upgrade ur iphone 3gs then go back ,go to jailbreak then cross "install cydia" and "install ipad baseband"... install ultrasn0w 1.2.5(repo666.ultrasn0w.com)
j0rc
j0rc - January 27, 2012 at 5:07am
Same thing I did for iPhone3GS 5.0.1 with baseband modem firmware of 6.15.00 Successfully jailbreak and unlock using "redsn0w_win_0.9.10b4.zip" + ""iPhone2,1_5.0.1_9A405_Restore" + ultrasn0w 1.2.5 Just be sure before you start jailbreak and unlock you do the ff which i did after several attempts: 1. Removed SIM Card 2. Turn of 3G and Cellular Data from "Settings>Network" 3. Be sure when Jailbreaking part tick on "install iPad baseband" ( which takes a lot of time so BE PATIENCE) 4. After successful jailbreak be sure not to select location service option and then install ultrasn0w (which is already in the "CYDIA>SOURCES>Cydia/Telesphoreo) utilities. 5. After successful install of ultrasn0w the OS should reboot then you can now see that the network signal will immediately turn to "Searching..." to "No Service" then insert you SIM card then that it.
long
long - February 5, 2012 at 3:15am
hi guy!! I already followed ur instruction. The fact is that after I jailbreak again, I really see my network service, but it happen just a while and then it turn to "searching" again!! do u still have more solution for this issue? thz in advance for ur kindness.
gaurav
gaurav - January 23, 2012 at 9:06am
i too am stuck with searching, why does dec-team doesn't reply, so many are stuck after JB for 5.0.1, i feel theres some issue with unlocking. earlier i performed tethered JB for 5.0.1, a week ago, but this untethered has not getting solved.please share, if anyone has any clue of getting out of this. (i did it on 3gs, 4.2.1, 6.15 to 5.0.1)
iphone3gs5.O.1
iphone3gs5.O.1 - January 24, 2012 at 10:44pm
Hello! i hope it will help you: use redsn0w_win_0.9.10b1 ,and go to "extras" go to "select ISPW" use the "iPhone2,1_5.0.1_9A405_Restore " you've used to upgrade ur iphone 3gs then go back ,go to jailbreak then cross "install cydia" and "install ipad baseband"... install ultrasn0w 1.2.5(repo666.ultrasn0w.com)
Jimmy
Jimmy - January 18, 2012 at 9:49am
I followed everything in the tutorial. And then it says, " Exploiting with limera1n"....stops there,.. What happened?
Youtube Converter
Youtube Converter - January 11, 2012 at 12:15am
Brilliant walkthrough/guide, it is the most simple guide i have found so far and it works perfectly! I have tried and failed at jail breaking my phone many times, now its finally done :) thanks alot.
Kaloyan Kolev
Kaloyan Kolev - January 9, 2012 at 3:02am
Everithing fine - custom IPSW, saved old BR, used redsn0w.. but findmyiphone on icloud does not work - why?
Kadu.g3
Kadu.g3 - January 8, 2012 at 3:15am
Good night friends have an iphone 3g 5.0.1 ios more redsn0w dfu mode does not recognize the page and try again redo it several times I can not make the jailbreak in any way, please help me, I have entered in as admin does not redsn0w recognizes the dfu mode ...
tenchix
tenchix - January 6, 2012 at 4:20pm
not work with redsn0w_win_0.9.10b3.zip (error and hang up applicacation) but with redsn0w_win_0.9.10b2.zip work perfectly !!!
cooldeep
cooldeep - January 4, 2012 at 10:21am
Friends, Need help with JB my 3gs. I have no clue about this whole JB process. I would like to go through the instructions and JB. But first I need some suggestions if my phone can be JBed.Here are my phone details. 3gs Version 5.0.1(9a405) Serial Num. 851270xxxxx and Modem firmware 5.16.05. Any suggestion would be appreciated. thnx
Sandy
Sandy - December 31, 2011 at 11:15am
Hei All I've updated my iPhone 3gs using redsn0w_win_0.9.10b3. everything went fine but i'm unable to get the signal. the firmware is 06.15.00. tried a couple of troubleshooting steps but couldn't get any solution. Can anyone please help me.
Mike
Mike - January 4, 2012 at 5:59am
I unlocked my iPhone this way. Hopefully this will help: [ I own a 3gs recently untethered 5.0.1 new bootrom iPhone with the iPad baseband... say that five times fast.]. Firstly, I restored my firmware with a custom ipsw stitched with shsh blobs using redsn0w 0.9.10b3 Secondly, I jailbroke the iPhone after checking the boxes "install cydia", and "install ipad baseband"(don't check this if you already have a viable baseband...obviously), Next uh ly, I installed Ultrasn0w 1.2.5 in cydia. Finally, I rebooted my iphone and inserted the sim card. After about thirty seconds, the beautiful letters of t-mobile came into the service area. And there was much rejoicing.Cheers.
Sandeep
Sandeep - December 30, 2011 at 9:20am
Hi All I'm using iPhone 3gs. I've upgraded from ios 4.1 to ios 5.0.1. Everything went fine but the sim is not working. I mean the it says no service. I've restored it, turned on/off data roaming and 3G (it works in some cases), hasn't worked at all. I've tried alternate sims but same error. Can anyone help me. I'm stuck..
Mike
Mike - January 4, 2012 at 6:01am
I unlocked my iPhone this way. Hopefully this will help: (I own a 3gs recently untethered 5.0.1 new bootrom iPhone with the iPad baseband). Firstly, I restored my firmware with a custom ipsw stitched with shsh blobs using redsn0w 0.9.10b3 Secondly, I jailbroke the iPhone after checking the boxes "install cydia", and "install ipad baseband"(don't check this if you already have a viable baseband...obviously), Next uh ly, I installed Ultrasn0w 1.2.5 in cydia. Finally, I rebooted my iphone and inserted the sim card. After about thirty seconds, the beautiful letters of t-mobile came into the service area. And there was much rejoicing.Cheers.
Jimena R
Jimena R - December 30, 2011 at 12:38am
Hi, I have an activation problem, it says "Your iPhone could not be activated because the activation server is temporarily unavailable. Try connecting your iPhone to iTunes to activate it, or try again in a couple of minutes. If this problem persists, contact Apple Support at apple.com/support" I'm at the step when I have to say if my iPhone 3Gs has the newer or older model, but I can't get through to settings to check that out because I can not activate it. What can I do, just try until it activates? Can I unplug it? Wout it ruin the process and the iPhone if I unplug it? And I don't know if it is coincidence or what but my iPhone is not detecting my SIM card and I opened iTunes and it doesn't detect the iPhone neither, it only says I should unplug it and insert a SIM card. Please help me! Thanks!
Jimena R
Jimena R - December 30, 2011 at 11:38am
Finally I could activate my iPhone 3GS but I still have the problem with the SIM card, it is not detecting it. I've already read in some forums about this problem with the 3GS, it seems that happens quite often. I need some help, please!
More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Sonoma
Where to Download macOS Ventura
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS