Como realizar um Jailbreak Untethered do seu iPhone 3GS (Windows) [5.0.1]
LIKE
TWEET
SHARE
PIN
SHARE
POST
MAIL
MORE
Posted December 27, 2011 at 12:28pm by iClarified
Instruções de como realizar um jailbreak untethered do seu iPhone 3GS no iOS 5.0.1 usando o RedSn0w para Windows. A versão do tutorial para Mac está aqui.
Este procedimento irá proporcionar o upgrade do seu baseband potencialmente arruinando suas chances de um desbloqueio. Por favor, siga o tutorial de como atualizar para o iOS 5.0.1 usando um custom ipsw se você precisa de um desbloqueio.
Se você quer um jailbreak para uma versão menor do firmware, você pode encontrar o tutorial apropriado aqui.
Primeiro Passo Crie uma pasta na sua área de trabalho chamada Pwnage
Baixe RedSn0w daqui e coloque na pasta Pwnage. Da mesma forma, baixe o último firmware 5.0.1 daqui e coloque na mesma pasta.
Extraia o arquivo .zip do Redsn0w na mesma pasta.
Segundo Passo: (Pule este passo se você já estiver com o iOS 5.0.1) Conecte seu iPhone no computador e abra o iTunes.
Selecione seu iPhone da lista de dispositivos à esquerda. Agora segure Shift e clique em Restore. É melhor fazer um Restore pois não gastará espaço desnecessário no seu iPhone.
Naveque até a pasta Pwnage no seu desktop e selecione o firmware 5.0.1 ipsw. Clique no botão Abrir para continuar.
O iTunes irá atualizar o firmware do seu iPhone.
Terceiro Passo Abra o aplicativo redsn0w da pasta redsn0w que extraímos antes.
**Usuários do Windows 7 podem precisar executar o redsn0w como administrador no modo de compatibilidade com Windows Vista. Você pode fazer isso clicando com o botão direito no arquivo executável e selecionando Propriedades no menu de ferramentas.
Quarto Passo Uma vez aberto o RedSn0w, clique no botão Extras
Escolha Select IPSW do menu Extras.
Selecione o firmware iOS 5.0.1 ipsw da pasta Pwnage no seu desktop e clique Open.
O Redsn0w precisa saber se você tem um modelo antigo ou novo do iPhone 3GS. Se você não tem certeza, você pode determinar a semana de produção através do Número de Série em Ajustes->Geral->Sobre. A semana de fabricação é determianda pelos 4º e 5º números do número de série. Os iPhones fabricados antes da semana 40 são antigos (desejável), os fabricados após a semana 45 são os novos. Se for mais recente clique em Yes, se for antigo clique em No
Clique no botão Jailbreak para continuar.
Quinto Passo Plugue seu iPhone no computador e tenha certeza que ele esteja DESLIGADO. Então clique no botão Next. Só clique quando estiver certo de que esteja PLUGADO e DESLIGADO.
Sexto Passo RedSn0w irá guiá-lo pelos passos para entrar no modo DFU. Você pode encontrar mais ajuda sobre o modo DFU aqui
1. Segure apertado o botão Power (canto) por 2 segundos.
Sem soltar o botão Power, segure também o botão Home (botão central) por 10 segundos.
Solte o botão Power sem soltar o botão Home até que o RedSn0w detecte seu iPhone.
Sétimo Passo Seu iPhone irá reiniciar
Oitavo Passo RedSn0w will prepare the jailbreak data.
Step Nine Selecione Install Cydia da lista de opções e clique em Next.
Décimo Passo Seu iPhone será reiniciado novamente e o RedSn0w irá iniciar o uploading do novo RAM Disk and Kernel.
Décimo Primeiro Passo Uma vez completo, você será notificado que o RedSn0w está feito. Quando seu iPhone acabar de reiniciar (5 minutos ou mais), ele estará jailbroken com o Cydia no SpringBoard.
*Como sempre um grande obrigado para iPhone Dev-Team, Chronic Dev-Team, pod2g, e Geohot por seu trabalho duro e contribuição para a comunidade iPhone community.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
I followed the following steps, my iphone ran many scripts and rebooted for couple of times.. Then it went to recovery mode and it didnt come out of that..I googled for coming out of recovery mode. For this i need to connect my iphone to my laptop. But after the jailbreak program ran, the laptop stopped recognizing the iphone (I tried all the usb ports)..When I went and checked the Device manager, all the drivers are in yellow color (Warning symbol). I am not able to connect any device to my laptop. Please help!!!
All I can give is a BIG THUMBS UP to all of you at iClarified. The tutorial is clear and easy to follow. Thank you to the Development Team for making my life awesome. I am not sure how, but it just worked. So, I post my story in detail, and maybe someone can benefit from it.
My wife traded in my dead 3GS (error 28) to Apple store with $149 for a NEW iPhone 3GS, 32G, QR203xxxxxx (January 2012, cleaned up from 'qr2030ga3ns' - refurbished?), ISO 5.0.1, baseband 05.16.05, bootloader 6.4_M3S2, Model MB718LL.
She was told it is a brand new, locked 3GS iphone and can not use with another carrier, except AT&T. So, I run f0rcecast and it said it is not jailbreakable and need to upgrade to iPadBB to unlock. After searching, I found out the iphone 3GS after week 28, 2011 will not work with iPadBB, and BB 05.16.05 can not be unlocked by ultrasn0w. I was so disappointed, but thinking maybe I can just jailbreak it and use it as a Touch by following this tutorial. (Although there is another site claim to downgrade it to 4.1 and...to unlock it - in Chinese, I think it is too much work, plus lots of risk.) I run redsn0w 0.9.10b6 just like this tutorial describes (check install Cydia & unlock), and it was jailbreak. Shut it down several times and it boot without a problem. Very very happy. So, I put my T-mobile pay-to-go SIM card and it works, without running untrasn0w or anything. Wow!!! not sure what has happened. But, it work. Thank you, Thank you.
The only thing I have not done is to register my iphone with Apple.
I also did not try it with my sim card before JB it, since I assumed it is locked.
So, maybe this iphone is a factory unlocked phone?
Maybe the new Toshiba chip can be unlocked with 05.16.05 BB on the old bootloader?
I also use iFaith to grab my iphone's shsh blob, thinking it will come in handy in the future, will this help? Anyway,
Thank you all again for the amazing work!!!
If my memory serves me correctly, because you hadn't inserted a sim prior to JBing your device it was locked to any network. I believe that your phone is now locked to T-Mobile as it was the first sim you used.
Now after using the iphone 3GS for 1 week or so, it shows NO SERVICE. Not sure if it is 3G related problem (saw "E"-"EDGE" all the time) and I am not on a prepay minute (no data) plan. However, I did use that iphone for about a week.
Try everything (you name it - reset network, airplane mode, sim in/out...), but no luck, I guess the baseband is unlockable (05.16.05) and I just got lucky to use it for a week. :(
Hi everyone!! I have just faced up with one big issue with ios 5.0.1. The problem is that my phone suddenly switch off once I unplug it. Has anyone ever encountered this problem? please kindly help me!! I look forward to your solution!! Thank in advance for your kindness
I have 3gs already unlocked and jailbroken :version 4.1, new boot loader,firmware 06.15.00.What advice to jailbreak to ios 5.0.1 and keep my unlock Thanks in anticipation.
Hi,
I tried all the steps given to jailbreak ios 5.0.1, baseband 6.15.00. Now i am getting No service. I have tried to reinstall ultrasn0w, mobile substrate, still nogo. Please help.
Hello.
Run redsn0w again and select Install Cydia, Install iPad baseband, Deactivate. Read carefully WARNING about iPad baseband!!!!! And make decision what to do. I tried on my iPhone 3GS with 06.15.00 firmware modem- works fine :)
Hi,
I tried all the steps given to jailbreak ios 5.0.1. Now i am getting No service. I have tried to reinstall ultrasn0w, mobile substrate, still nogo. Please help.
Hello.
You have to activate your iPhone using ORYGINAL SIM card. I`ve got the same. Make big mess in my iPhone and now I have`t got possibility to make a calls. Sad :(
Hi.
Ha - Mission completed. :) iPhone jailbreaked and unlocked . All what you have to do is make a TICK next to Install iPad baseband in redsn0w (read carefully WARNING) now I can use Cydia, Installious and make a call.
Hello! i hope it will help you: use redsn0w_win_0.9.10b1 ,and go to "extras" go to "select ISPW" use the "iPhone2,1_5.0.1_9A405_Restore " you've used to upgrade ur iphone 3gs then go back ,go to jailbreak then cross "install cydia" and "install ipad baseband"... install ultrasn0w 1.2.5(repo666.ultrasn0w.com)
Same thing I did for iPhone3GS 5.0.1 with baseband modem firmware of 6.15.00
Successfully jailbreak and unlock using "redsn0w_win_0.9.10b4.zip" + ""iPhone2,1_5.0.1_9A405_Restore" + ultrasn0w 1.2.5
Just be sure before you start jailbreak and unlock you do the ff which i did after several attempts:
1. Removed SIM Card
2. Turn of 3G and Cellular Data from "Settings>Network"
3. Be sure when Jailbreaking part tick on "install iPad baseband" ( which takes a lot of time so BE PATIENCE)
4. After successful jailbreak be sure not to select location service option and then install ultrasn0w (which is already in the "CYDIA>SOURCES>Cydia/Telesphoreo) utilities.
5. After successful install of ultrasn0w the OS should reboot then you can now see that the network signal will immediately turn to "Searching..." to "No Service" then insert you SIM card then that it.
hi guy!! I already followed ur instruction. The fact is that after I jailbreak again, I really see my network service, but it happen just a while and then it turn to "searching" again!! do u still have more solution for this issue? thz in advance for ur kindness.
i too am stuck with searching, why does dec-team doesn't reply, so many are stuck after JB for 5.0.1, i feel theres some issue with unlocking. earlier i performed tethered JB for 5.0.1, a week ago, but this untethered has not getting solved.please share, if anyone has any clue of getting out of this.
(i did it on 3gs, 4.2.1, 6.15 to 5.0.1)
Hello!
i hope it will help you:
use redsn0w_win_0.9.10b1 ,and go to "extras" go to "select ISPW" use the "iPhone2,1_5.0.1_9A405_Restore " you've used to upgrade ur iphone 3gs then go back ,go to jailbreak then cross "install cydia" and "install ipad baseband"...
install ultrasn0w 1.2.5(repo666.ultrasn0w.com)
Brilliant walkthrough/guide, it is the most simple guide i have found so far and it works perfectly! I have tried and failed at jail breaking my phone many times, now its finally done :) thanks alot.
Good night friends have an iphone 3g 5.0.1 ios more redsn0w dfu mode does not recognize the page and try again redo it several times I can not make the jailbreak in any way, please help me, I have entered in as admin does not redsn0w recognizes the dfu mode ...
Friends, Need help with JB my 3gs. I have no clue about this whole JB process. I would like to go through the instructions and JB. But first I need some suggestions if my phone can be JBed.Here are my phone details. 3gs Version 5.0.1(9a405) Serial Num. 851270xxxxx and Modem firmware 5.16.05. Any suggestion would be appreciated. thnx
Hei All
I've updated my iPhone 3gs using redsn0w_win_0.9.10b3. everything went fine but i'm unable to get the signal. the firmware is 06.15.00. tried a couple of troubleshooting steps but couldn't get any solution. Can anyone please help me.
I unlocked my iPhone this way. Hopefully this will help:
[ I own a 3gs recently untethered 5.0.1 new bootrom iPhone with the iPad baseband... say that five times fast.].
Firstly, I restored my firmware with a custom ipsw stitched with shsh blobs using redsn0w 0.9.10b3 Secondly, I jailbroke the iPhone after checking the boxes "install cydia", and "install ipad baseband"(don't check this if you already have a viable baseband...obviously),
Next uh ly, I installed Ultrasn0w 1.2.5 in cydia.
Finally, I rebooted my iphone and inserted the sim card. After about thirty seconds, the beautiful letters of t-mobile came into the service area. And there was much rejoicing.Cheers.
Hi All
I'm using iPhone 3gs. I've upgraded from ios 4.1 to ios 5.0.1. Everything went fine but the sim is not working. I mean the it says no service. I've restored it, turned on/off data roaming and 3G (it works in some cases), hasn't worked at all. I've tried alternate sims but same error. Can anyone help me. I'm stuck..
I unlocked my iPhone this way. Hopefully this will help: (I own a 3gs recently untethered 5.0.1 new bootrom iPhone with the iPad baseband). Firstly, I restored my firmware with a custom ipsw stitched with shsh blobs using redsn0w 0.9.10b3 Secondly, I jailbroke the iPhone after checking the boxes "install cydia", and "install ipad baseband"(don't check this if you already have a viable baseband...obviously), Next uh ly, I installed Ultrasn0w 1.2.5 in cydia. Finally, I rebooted my iphone and inserted the sim card. After about thirty seconds, the beautiful letters of t-mobile came into the service area. And there was much rejoicing.Cheers.
Hi, I have an activation problem, it says "Your iPhone could not be activated because the activation server is temporarily unavailable. Try connecting your iPhone to iTunes to activate it, or try again in a couple of minutes. If this problem persists, contact Apple Support at apple.com/support"
I'm at the step when I have to say if my iPhone 3Gs has the newer or older model, but I can't get through to settings to check that out because I can not activate it.
What can I do, just try until it activates? Can I unplug it? Wout it ruin the process and the iPhone if I unplug it?
And I don't know if it is coincidence or what but my iPhone is not detecting my SIM card and I opened iTunes and it doesn't detect the iPhone neither, it only says I should unplug it and insert a SIM card.
Please help me! Thanks!
Finally I could activate my iPhone 3GS but I still have the problem with the SIM card, it is not detecting it. I've already read in some forums about this problem with the 3GS, it seems that happens quite often. I need some help, please!