March 19, 2024
Як зробити Jailbreak для 2.х.х 3G Iphone використовуючи QuickPwn (Windows)

Як зробити Jailbreak для 2.х.х 3G Iphone використовуючи QuickPwn (Windows)

Posted February 3, 2009 at 11:40pm by iClarified
EnglishChinese (Traditional)CroatianCzechFrenchGermanGreekIndonesianItalianLatvianPolishPortuguese (Brazil)RomanianSlovenianSpanishSwedishTurkishUkranian
Це інструкції для Jailbreak вашого 3G Iphone до 2.1-2.2.1 Iphone прошивки використовуючи QuickPwn для Windows.

Якщо ви хочете розблокувати ваш Iphone ви можете використати ці інструкції для Jailbreak ТІЛЬКИ ЯКЩО ви на 02.28 baseband чи нижчій І ви відновляєте до 2.2 (НЕ 2.2.1). Як що ви хочете використати ці інструкції щоб відновити і Jailbreak прошивку 2.2.1 то на жаль зараз не існує ніяких методів це здійснити. Ви можете провірити ваш baseband тут.


1. Створіть папку Pwnage і закачайте в неї ці файли:
- QuickPwn-225-2.zip
ДЛЯ ТИХ ХТО ХОЧЕ РОЗБЛОКУВАТИ:
- 2.2.0 (3G): iPhone1,2_2.2_5G77_Restore.ipsw
ДЛЯ ТИХ ХТО НЕ ХОЧЕ РОЗБЛОКУВАТИ:
- 2.2.1 (3G): iPhone1,2_2.2.1_5H11_Restore.ipsw
Розпакуйте QuickPwn в створену папку.
Як зробити Jailbreak для 2.х.х 3G Iphone використовуючи QuickPwn (Windows)
2. Підєднайте ваш Iphone до компютера і запустіть iTunes.
Як зробити Jailbreak для 2.х.х 3G Iphone використовуючи QuickPwn (Windows)
Виберіть ваш Iphone з девайсів які знаходяться зліва. Тепер нажміть Shift клавішу і клямцніть по Restore кнопці.
Як зробити Jailbreak для 2.х.х 3G Iphone використовуючи QuickPwn (Windows)
В новому вікні перейдіть в папку куди було скачено прошивку ispw, виберіть її і нажміть Open кнопку щоб продовжити.
Як зробити Jailbreak для 2.х.х 3G Iphone використовуючи QuickPwn (Windows)
3. Як тільки iTunes завершило обновляти ваш Iphone до потрібної вам прошивки, ви можете запустити QuickPwn.exe.
Як зробити Jailbreak для 2.х.х 3G Iphone використовуючи QuickPwn (Windows)
4. Впевніться що Iphone підключений до компютера і натисніть синю стрілку щоб продовжити.
Як зробити Jailbreak для 2.х.х 3G Iphone використовуючи QuickPwn (Windows)
5. Натисніть Browse кнопку щоб знайти вашого Iphone прошивку.
Як зробити Jailbreak для 2.х.х 3G Iphone використовуючи QuickPwn (Windows)
6. Виберіть прошивку з папки і натисніть Open кнопку.
Як зробити Jailbreak для 2.х.х 3G Iphone використовуючи QuickPwn (Windows)
7. QuickPwn перевірить чи прошивка не пошкоджена, після чого натисніть синю стрілку щоб продовжити.
Як зробити Jailbreak для 2.х.х 3G Iphone використовуючи QuickPwn (Windows)
8. Тепер ви зможете вибрати програми які хочете додати, такі як - Cydia, Installer. Виберіть ті які вам довподоби і натисніть синю стрілку.
Як зробити Jailbreak для 2.х.х 3G Iphone використовуючи QuickPwn (Windows)
9. QuickPwn запитає вас чи Iphone підєднаний через USB перед тим як продовжувати. Натисніть синю стрілку щоб продовжити.
Як зробити Jailbreak для 2.х.х 3G Iphone використовуючи QuickPwn (Windows)
10. QuickPwn автоматично переключить Iphone в відновлюючий режим. В відновлюючому режимі вам потрібно буде: Натиснути і тримати "Домашню" кнопку 5 сек. Тримаючи "Домашню" кнопку, натиснути і тримати кнопку "Живлення" на протязі 10 сек. Потім відпустити кнопку "Живлення" і продовжувати тримати "Домашню" кнопку поки Iphone не увійде в DFU режим.
(Уважно дивіться на екран програми QuickPwn і робіть так як буде там написано поетапно)
Як зробити Jailbreak для 2.х.х 3G Iphone використовуючи QuickPwn (Windows)
11. Коли QuickPwn знайде Iphone в DFU режимі, процес jailbreak почнеться.
Як зробити Jailbreak для 2.х.х 3G Iphone використовуючи QuickPwn (Windows)
12. Коли jailbreak прцес закінчеться, ви буде сповістені що він закінчився успішно!
Як зробити Jailbreak для 2.х.х 3G Iphone використовуючи QuickPwn (Windows)


Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (578)
You must login or register to add a comment...
zaymg
zaymg - May 21, 2013 at 5:07pm
thank
carnival cruises
carnival cruises - April 19, 2011 at 5:10pm
wonderful website keep up the good work.
Valerie N
Valerie N - August 1, 2009 at 12:03pm
I got through all the steps, now I'm waiting for my iPhone to reboot and nothing ! It's keeps buzzin like it's going to turn on but it doesn't and itunes doesn't show that my iPhone is connected ! Can somebody post what to do now?
joao
joao - July 20, 2009 at 6:25pm
I want to unlock and jailbrake my iPhone 3G but I forgot my passcode. Can anyone help me override the passlock so I can unlock/jailbrake my iPhone.
Shaik usman
Shaik usman - June 19, 2009 at 3:08am
i tried to download through the link provided after download, i couldn't found the restore firmware.please help me i wanna unlock 2.2.1(3G).thanks
prongs
prongs - June 17, 2009 at 3:57am
Can I use this method to jailbreak an otb iphone 3g thereby also activating it? Or is there another procedure to follow to activate it first. Kindly help.
iphone noob
iphone noob - June 6, 2009 at 7:12am
everything was ok untill the third step man it came out a pop out when i click to launch quickpwn it says an error had cause the program to stop runing WTF? BTWW i am running on vista 32bit system help me man
fun@fun
fun@fun - July 13, 2009 at 3:38pm
I have very same problem. My computer is on XP
margarita
margarita - June 4, 2009 at 8:50pm
is it possible to do all this without losing all the contacts, applications, etc?
fank
fank - June 4, 2009 at 7:34pm
i have a jailbroken iphone 3g but can i use ne sim card wid it or it will work only wid the turbo sim..
Shaggy
Shaggy - June 3, 2009 at 11:27am
I get to the QuickPwn step where it says 'wait for your phone to connect in Recovery Mode'... but nothing happens...it wont connect??? Anyone got any ideas? It connects OK through I tunes and I can get this far on the jailbreak. Am I doing anything wrong?
jon
jon - June 8, 2009 at 2:57pm
im having the same problem with quickpwn. any fix?
Nicole
Nicole - June 11, 2009 at 4:14pm
Same Problem... Does it ever go to recovery mode???
joe
joe - November 1, 2009 at 3:43pm
Im the same cant fix this anyone found a solution to this ?????????
Toni
Toni - June 3, 2009 at 6:37am
I succesfully jailbreaked my iphone 3g with firmware 2.2.1. and it works great. I had slight problems with ipsw file. After some delay I removed zip extension and I was able to find ipsw file when QuickPwn asked me to browse for 2.2.1 firmware. Go to Start, Control panel, Folder Options, View, Hide extensions for known file type and then rename folder and remove zip extension. I hope this helps. Bye
Marc
Marc - June 1, 2009 at 6:10am
Thanks for the explanation. It works great and I like the pineapple.
Chris
Chris - May 27, 2009 at 1:17am
Currious, I have been using ym Iphone since august 08, if I do this restoral for the jailbreak will it wipe all my contacts and everything? if it does is there anyway to merge the two restores, my original one with the jailbroken version?
jazz
jazz - May 27, 2009 at 2:42am
Right click ure iPhone in iTunes and create backup then u can restore from backup later
vedtam
vedtam - May 24, 2009 at 3:54pm
Hi, if I have a new, bricked iPhone 3G I guess I have to start with step 4... or? THX!!!!
Han
Han - May 23, 2009 at 5:31pm
When I get to the `Browse for ipsw` step, I put in the file, 2.2.1, and it should be working, but the blue arrow wont load, and so I cant carry on with the jailbreaking. Nor can I see the iPod that should be on the left hand side. (the one that gets a check mark). Help please?
robert
robert - June 3, 2009 at 5:47am
I am having exactly the same issue. Browse for the firmware and says that quickpawn does not update firmware. It seems the firmware has an extra "2_" at the star tof the file name or something. Please help !!!
yasbm
yasbm - May 22, 2009 at 4:40pm
Iphone 3G firmware 02.08.01 version 2.0.2(5C1) if i upgrate to 2.2.1 i will have problem with it ? sorry i am new on this thanks for helping
vimm
vimm - May 23, 2009 at 12:34pm
if you want to unlocke your phone by useing yellowsnow do not upgrade to 2.2.1. you do custom restore to 2.2.0. I just did my.I have the same firmware.
Nathan
Nathan - May 20, 2009 at 5:25am
Hi, I followed the instructions. In the middle of first steps (restore with itunes) i get error (9) can't restore. What can I do? if I restore it will put the newest version, which is not jailbroken and i will not be able to jailbreak it... how do I restore to exactly what I had before trying? thanks!
nnm
nnm - May 21, 2009 at 12:39am
I used Itunes 7.7 to restore
christopher357
christopher357 - May 19, 2009 at 3:26pm
if i hack my iphone 2.2.1 can i restor it so the stor cant se that i have hackt it if its stop working??
dono
dono - June 1, 2009 at 10:10am
My i-ph 16Gb 2.2.1(5H11)froze before I got to Step3...! Screen has as a pic of a USB plug and an arrow pointing it at the iTunes logo which has a little picyure of a lock just above it...
ARASH
ARASH - May 18, 2009 at 2:05am
hey i have a big problem ,it stays on the reboot screen for like 30 mins and keeps vibrating evry couple of minutes…what am i to do?
Felix
Felix - May 13, 2009 at 10:47am
I restored my iphone using iPhone1,2_2.2_5G77_Restore.ipsw & quickpwn. Everything worked, except that i dont have service. Can someone help me please? ( flex60mph@aim.com )
jazz
jazz - May 13, 2009 at 4:52pm
Have u installed yellowsn0w from cydia
More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Monterey
Where to Download macOS Ventura
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS