March 2, 2024

Jailbreak je iPod Touch 2G (Windows)

Posted March 11, 2009 at 2:06pm by iClarified
EnglishCzechDutchFinnishFrenchPortuguese (Brazil)SpanishVietnamese
Hier laten we je zien hoe je de 2G Ipod Touch kunt jailbreaken met behulp van Windows en Voltage.

Stap Een
Maak een map aan genaamd 'Pwnage' en zet die op je bureablad. Download daarna Voltage naar die map toe.
- Voltage
Jailbreak je iPod Touch 2G (Windows)

Stap Twee
Pak het 'Voltage' bestand uit. NB*: Je hebt hier (bijvoorbeeld) WinRAR voor nodig.
Jailbreak je iPod Touch 2G (Windows)


Stap Drie
Open vervolgens die 'Voltage' map en open daarna het bestand 'Voltage - Jailbreaker.exe'.
Jailbreak je iPod Touch 2G (Windows)

Stap Vier
Het programma wordt geopend en je krijgt 3 dingen te zien waar je aan moet voldoen.
Jailbreak je iPod Touch 2G (Windows)

Klik op 'Begin Download' om de Ipod Touch firmware ipsw te downloaden.
Jailbreak je iPod Touch 2G (Windows)

Klik op 'save' om het firmware bestand op je harde schijf op te slaan.
Jailbreak je iPod Touch 2G (Windows)

Sla het bestand vervolgens op in de 'Voltage' map die je eerder hebt aangemaakt.
Jailbreak je iPod Touch 2G (Windows)

Stap Vijf
Als je een Vista gebruiker bent moet je deze stappen volgen. Gebruik je Windows XP? Ga dan verder met stap 6.

Open de 'Install_Files' map, die staat in de 'Voltage' map.
Jailbreak je iPod Touch 2G (Windows)

Klik me je rechtermuisknop op 'lib-win32-filter-bin-0.1.12.1.exe' en klik op 'properties' (Nederlands: Eigenschappen) dat in het menu verschijnt .
Jailbreak je iPod Touch 2G (Windows)

Jailbreak je iPod Touch 2G (Windows)

Ga naar het tabblad 'Compatibility' (Nederlands: Compatibiliteit).
Jailbreak je iPod Touch 2G (Windows)

Vink het hokje aan waar staat: 'Run this program in compatibility mode for:' (Nederlands: Dit programma in deze compatibiliteitsmodus uitvoeren). Selecteer in het drop-down menu 'Windows XP (Service Pack 2)' en klik vervolgen op 'OK'.
Jailbreak je iPod Touch 2G (Windows)

Stap Zes
Klik op 'Begin Install' om libUSB te installeren.
Jailbreak je iPod Touch 2G (Windows)

Er verschijnt een scherm, volg de stappen die daar worden aangegeven om het te installeren.
Jailbreak je iPod Touch 2G (Windows)

Jailbreak je iPod Touch 2G (Windows)

Stap Zeven
Klik op 'Begin Install' om C++ Installer te installeren.
Jailbreak je iPod Touch 2G (Windows)

Er verschijnt een scherm, volg de stappen die daar worden aangegeven om het te installeren.
Jailbreak je iPod Touch 2G (Windows)

Jailbreak je iPod Touch 2G (Windows)

Als de installatie is voltooid klik je in het Voltage scherm rechtsonder op 'Next Step'.

Stap Acht
Klik op de 'select' knop om het IPSW bestand te selecteren dat je hebt gedownload.
Jailbreak je iPod Touch 2G (Windows)

Ga naar de Voltage map en open het iPod touch 2.2.1 firmware bestand.
Jailbreak je iPod Touch 2G (Windows)

Stap Negen
Klik op 'Make IPSW' om door te gaan.
Jailbreak je iPod Touch 2G (Windows)

Er opent zich een scherm waar je de voorgang kunt zien. Zodra het klaar is dan sluit het scherm weer vanzelf.
Jailbreak je iPod Touch 2G (Windows)

Klik op 'Next Step' om door te gaan.

Stap Tien
Open de 'JB_Files' map, die staat weer in je Voltage map.
Jailbreak je iPod Touch 2G (Windows)

Klik met je rechtermuisknop op het 'Custom_Restore.ipsw' bestand en klik dan op 'Rename' (Nederlands: Naam wijzigen) in het menu dat verschijnt.
Jailbreak je iPod Touch 2G (Windows)

Jailbreak je iPod Touch 2G (Windows)

Zet aan het einde van het bestand '.zip' en klik indien nodig op 'Yes' (Ja) om door te gaan. Je hebt nu het bestand 'Custom_Restore.ipsw.zip'
Jailbreak je iPod Touch 2G (Windows)

Klik met je rechtermuisknop op het 'Custom_Restore.ipsw.zip' bestand en selecteer 'Open with' (Nederlands: Openen met..) in het menu dat verschijnt.
Jailbreak je iPod Touch 2G (Windows)

Jailbreak je iPod Touch 2G (Windows)

Selecteer WinRAR in de lijst met programma's en klik vervolgens op 'OK'. NB*: Als je WinRAR niet hebt moet je deze eerst installeren.
Jailbreak je iPod Touch 2G (Windows)

Als WinRAR zich opent (en dus ook het bestand) dubbelklik je op de 'Firmware' map die in beeld verschijnt om hem te openen.
Jailbreak je iPod Touch 2G (Windows)

Open vervolgens de map 'all_flash'.
Jailbreak je iPod Touch 2G (Windows)

Open vervolgens de map 'all_flash.n72ap.production'.
Jailbreak je iPod Touch 2G (Windows)

Download het aangepaste LLB (LLB.n72ap.RELEASE.img3) HIER en sleep het bestand in je WinRAR scherm.
Jailbreak je iPod Touch 2G (Windows)

Er opent zich een schermpje. Klik op 'OK' om door te gaan.
Jailbreak je iPod Touch 2G (Windows)

WinRAR past nu het archief aan.
Jailbreak je iPod Touch 2G (Windows)
Sluit WinRAR en ga terug naar de 'JB_Files' map.
Jailbreak je iPod Touch 2G (Windows)

Klik met je rechtermuisknop op het 'Custom_Restore.ipsw.zip' bestand en klik dan op 'Rename' (Nederlands: Naam wijzigen).
Jailbreak je iPod Touch 2G (Windows)

Hernoem het bestand naar 'Custom_Restore.ipsw' en klik indien nodig op 'Yes' (Ja).
Jailbreak je iPod Touch 2G (Windows)

Jailbreak je iPod Touch 2G (Windows)

Stap Elf
Nu moet je via Voltage je Ipod in DFU mode zetten. Het makkelijkste is om de Ipod aan te sluiten op je PC en dan allebei de knoppen op je Ipod 10 seconden lang in te houden. Direct na die tien seconden laat je de bovenste knop los en houd je de 'Home' knop nog eens 10 seconden lang vast (zonder hem eerst lost te laten).
Jailbreak je iPod Touch 2G (Windows)

Om te kijken of je Ipod echt in DFU mode staat klik je op de 'Check DFU Mode' knop.
Jailbreak je iPod Touch 2G (Windows)

Als die in DFU mode zit klik je op 'Next Step' om door te gaan.

Stap Twaalf
Nu kun je het apparaat patchen. Klik op de 'Patch Device' knop.
Jailbreak je iPod Touch 2G (Windows)

Stap Dertien
Als het apparaat gepatched is moet je de Custom Firmware herstellen via iTunes.
Jailbreak je iPod Touch 2G (Windows)

iTunes detecteert een iPod in herstelmodus. Klik op 'OK'.
Jailbreak je iPod Touch 2G (Windows)

Houd de schift-knop ingedrukt terwijl je op de 'Restore' (Nederlands: Herstellen) knop klikt in iTunes.
Jailbreak je iPod Touch 2G (Windows)

Er opent zich een schermpje waarin je de Custom Firmware moet selecteren. Selecteer het 'Custom_Restore.ipsw' bestand in de map 'Voltage/JB_Files' en klik op 'Open'.
Jailbreak je iPod Touch 2G (Windows)

Stap Veertien
Als de firmware hersteld is dan heb je een gajailbreakte iPod Touch 2G.
Jailbreak je iPod Touch 2G (Windows)

BEDANKT
Wij bedanken CalebMingle voor het maken van Voltage.
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
You must login or register to add a comment...
Filipe Camargo
Filipe Camargo - June 16, 2010 at 12:58pm
voltage.rar link is down!
f1982
f1982 - December 24, 2009 at 11:04am
I have a brand new touch that I want to jailbreak. I understand that blackra1n will only work on those which were made before week 40, ie the serial number has 4th and 5th digits of 39 or less. Jailbreaking with blackra1n on models with serials 40 or above (mine is 48) will require the unit to be tethered and blackra1n run every time it is turned on. This is simply not worth the hassle! So firstly, does anyone know if the voltage software will jailbreak without the tethering issue, and secondly, if id does can someone point me in the direction of a working download link? Cheers, F1 larscandrum@gmail.com
f1982
f1982 - December 22, 2009 at 3:41pm
The voltage download doesn't work and I can't find any working alternatives. Can someone who has it, and the custom firmware post a working download link, or if not send me them? I'd be extremely grateful.
Bella
Bella - February 14, 2010 at 10:22pm
Link for voltage download (copy + paste link) http://www.megaupload.com/?d=HAKJVJ46 Link for firmware downloads (copy + paste link) http://www.felixbruns.de/iPod/firmware/ good luck! I'm having a lot of trouble installing the libUSB. Done everything it told me to do and even tried it the Vista way. (I'm windows 7). Also, when i get to "Make IPSW" I click it, it does the black window thing then closes 3 seconds later. I try to click next step but it says "Custom IPSW not found" any help? D:
apo
apo - October 20, 2009 at 2:45pm
I got stuck at step 13. Error 1601 appeared after restoring it with "custom restore". I 've been doing da same thing in that instruction. What did I missed?
maikey
maikey - September 22, 2009 at 3:37pm
hey guys. can anyone help me??? after the restoring. my ipod won't turn on again? please help me. :(
maikey
maikey - September 22, 2009 at 3:57pm
problem resolved... thanks anyway. :)
amit
amit - September 16, 2009 at 10:07pm
This guide is getting old now. OS 3.0 is out and that is something you should upgrade to. there are jail breaking tutorials over the internet for that and they are way easier. I have used this method, it works but the new jailbreaks called red snow is way easier. Google it.
hi wrote
hi wrote - September 15, 2009 at 10:32pm
my screen got white after booting do i have to wait or is there something wrong plz help
Ivan * HELP-ME
Ivan * HELP-ME - August 21, 2009 at 9:22pm
Ola, eu realizei os passos até colocar em DFU, só que não consegui e desliguei o computador... no outro dia quando liguei estava lendo pra caramba, travando sabe... apaguei os arquivos que reconheci da instalação, mas o computador continua lendo, Vc sabe me dizer o faço para voltar ao normal???? Help-me, please
sssssss
sssssss - August 20, 2009 at 9:08am
pls heeelp. ive converted the custom restore into zip and im in winrar. what does it mean when it says to download and drag it onto the winrar thingo
ivan
ivan - August 21, 2009 at 9:18pm
Ola, eu realizei os passos até colocar em DFU, só que não consegui e desliguei o computador... no outro dia quando liguei estava lendo pra caramba, travando sabe... apaguei os arquivos que reconheci da instalação, mas o computador continua lendo, Vc sabe me dizer o faço para voltar ao normal???? Help-me, please
derfjam
derfjam - August 19, 2009 at 3:08am
I completed the tethered jailbreak and my ipod is working fine already. but when i turned it off it does not want to turn on again. is this a normal behavior? do i have to repeat the process again?
mojo
mojo - August 8, 2009 at 7:51pm
I tried the instructions on the web page and the device would not re boot at the end of the process. Then the Itouch just died and displayed Unknown USB device. Eventually, I got the thing back to life and restored the original firmware 2.2.1 Can someone 'clarify' if the llb.img patched file that is downloaded should replace and overwrite the existing llb.img file in the firmware/all_flash folder? Coz the downloaded patch llb file has a [1] in the file name......if someone from iclarified can 'clarify, it will be much appreciated :-)
derfjam
derfjam - August 16, 2009 at 10:28am
i had the same dilema.how did you got it back to work?
mojo25
mojo25 - August 16, 2009 at 11:01am
Hi, I did manage to restore the original firmware on the ipod and it works as normal. Considering I've only just purchased it I'm reluctant to try jailbreaking the itouch for fear of being unable to restore at all..... I managed to recover from the 'USD Device unrecognised' message through going into device manager on the laptop and removing the USB entry and trying again, somehow I managed to get the laptop to recognise the itouch and load up itunes once I had removed the USB device in 'Device Manager'. Since then, I'm off the idea of jail breaking for now until I'm bored of the itouch.
james
james - August 17, 2009 at 7:18am
Hey man ye i got the same problem with my itouch 2g with the usb not recodnised after doing the whole pwnage thing. and because i am not a computer tech can u explain to me in simple steps how you got ur itouch to be recodnised again? that would b really awesome. cheers
rahulr0y
rahulr0y - July 23, 2009 at 12:56pm
im at the part where you have to select the ipsw but it is taaking forever, there is a a cricle of black cicles just rotating over moving file....
bhikare
bhikare - July 21, 2009 at 9:00pm
Worked Great!!!!! At first I got the "ERROR1604". All you have to do is get your ipod in DFU Mode, patch it, then restore it in itunes with the restore_firmware.ipsw. Once that is done, let it boot up. Then put it in DFU mode again and patch it again. Then go back into itunes and restore the ipod with the custom_restore.ipsw. Thankyou
Tyrial
Tyrial - August 31, 2009 at 3:00pm
Same thing happened to me. I couldn't figure it out until I read your post. Thanks.
david
david - July 21, 2009 at 1:09am
my ipods in dfu but voltage doesnt see it itunes does though any help plz
irish
irish - July 19, 2009 at 1:09am
in step 7 i cant seem to find the firmware under voltage "iPod2,1_2.2.1_5H11a_Restore" the icon of a white box with a note sign where will i beble to download that?
Icantdoit:S
Icantdoit:S - June 12, 2009 at 6:14pm
Somehow i cant do it. I cant Restore with the custom. Why cant i?
SaJi482
SaJi482 - June 29, 2009 at 10:15am
I had error 1604. If you have the sam one then you can try to jailbreak again from the start or downgrade iTunes to 8.1.1. (You will lost library and backup of your iPod) (Uninstall iTunes and then install iTunes 8.1.1. (http://www.oldapps.com/itunes.php) I hope it will help.
Fahd
Fahd - June 8, 2009 at 8:22am
Does anyone know if this method will work but with Firmware 3.0 Beta 5?
pipo
pipo - June 25, 2009 at 10:23am
it shouldent
NIck
NIck - June 4, 2009 at 6:43pm
Yeah so when I go to rename the Custom_Restore.ipsw (to add the .zip), the file extension doesn't show up, so what ends up happening is Custom_Restore.zip.ipsw... which will not open with winrar. No matter what i do it always slaps .ipsw on the end of it.... Anyone have any ideas? would be greatly appreciated. Thanks
SaJi482
SaJi482 - June 29, 2009 at 10:09am
I had same problem, but then i figuered it out. I am using Windows 7 RC so it's problably diffrent way. 1. Open Windows Explorer ( just a single map, like Pwnage )or documents...) 2. Organize -> Folder and search options -> View 3. Uncheck Hide extensions for known file types
iPod2userhelp
iPod2userhelp - July 9, 2009 at 9:08pm
Thanks so much for the help with renaming, it helped me a lot.
iFahad
iFahad - May 30, 2009 at 3:02pm
thankyou very much i dont have ipod touch 2g but i understand it all.
mpc
mpc - May 28, 2009 at 5:42pm
It works. My Ipod 2G is jailbreak. Only follow the instructions and no any problem. TKS!!
102 More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Monterey
Where to Download macOS Ventura
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS