March 29, 2024

كيفية فك الحماية لجهاز الآيفون على إصدار٣.٠ بإستخدام برنامج الرد سنو ((الماك))

Posted June 20, 2009 at 7:48am by iClarified
EnglishArabicCzechFrenchGermanIndonesianPortuguese (Brazil)SpanishSwedishTurkish


هناك أمور يجب عليك إتباعها عندما تريد أن تفك حماية الآيفون للنسخة ٣.٠بإستخدام الرد سنو ((لمستخدمي الماك)).
--إذا كنت مستخدما لنظام الويندوز , يمكنك تتبع الدرس على الرابط التالي --
here.
لمستخدمي الآيفون الجيل الثاني , يمكنكم تتيع الدرس على الرابط التالي:
here

يمكنك إستخدام هذا الدرس في فك حماية الآيفون قبل تطبيق فتح الجهاز ببرنامج ألترا سنو.
الخطوة الأولى
أنشئ مجلدا جديدا على سطح المكتب بإسم
Pwnage

قم بتحميل برنامج الرد سنو من الروابط التالية here
ثم ضعه في الملف الذي أنشأته مسبقا.
بنفس الطريقة , حمل الإصدار الثالث للآيفون من الروابط أدناه , ثم ضعها في المجلد الذي أنشأته.


3.0.0 (2G) لجوالات الآيفون: iPhone1,1_3.0_7A341_Restore.ipsw
3.0.0 (3G)لجوالات الآيفون: iPhone1,2_3.0_7A341_Restore.ipsw

قم بإستخراج برنامج الردسنو وضعه في المجلد الذي أنشأته.
كيفية فك الحماية لجهاز الآيفون على إصدار٣.٠ بإستخدام برنامج الرد سنو ((الماك))

الخطوة الثانية
قم بتوصيل الآيفون بالكمبيوتر ثم قم بتشغيل برنامج الآي تيونز
كيفية فك الحماية لجهاز الآيفون على إصدار٣.٠ بإستخدام برنامج الرد سنو ((الماك))

قم بإختيار جهاز الآيفون من القائمة المتواجدة على اليسار.
الآن إضغط ضغطا متواصلا على زر
Shiftو Restore .
هذه الطريقة قمنا بها لإستعادة الجهاز إذا لم توفق في تحميل النسخة الجديدة من الآيفون أو صارت هناك مشاكل في فك الحماية.
كيفية فك الحماية لجهاز الآيفون على إصدار٣.٠ بإستخدام برنامج الرد سنو ((الماك))

Navigate to the Pwnage folder on your desktop and select the firmware ipsw.
إضغط على Open للإستمرار.
كيفية فك الحماية لجهاز الآيفون على إصدار٣.٠ بإستخدام برنامج الرد سنو ((الماك))

الخطوة الثالثه
عندما ينتهي الآي تيونز من تحديث جهازك على الإصدار المطلوب , عندها يمكنك فتح البرنامج
رد سنو من المجلد الذي أنشأته على سطح المكتب.
كيفية فك الحماية لجهاز الآيفون على إصدار٣.٠ بإستخدام برنامج الرد سنو ((الماك))

الخطوة الرابعة
عندما تفتح برنامج الرد سنو قم بالضغط على أيقونة
Browse
كيفية فك الحماية لجهاز الآيفون على إصدار٣.٠ بإستخدام برنامج الرد سنو ((الماك))

الخطوة الخامسة
إختر ملف التحديث الذي قمت بتحميله لجهازك ثم إظغط علىأيقونة
Open
كيفية فك الحماية لجهاز الآيفون على إصدار٣.٠ بإستخدام برنامج الرد سنو ((الماك))

الخطوة السادسة
عندما ينتهي البرنامج من التأكد من نسخة التحديث المطلوبة إظغط على
Next للإستمرار.

كيفية فك الحماية لجهاز الآيفون على إصدار٣.٠ بإستخدام برنامج الرد سنو ((الماك))

الخطوة السابعة
تأكد من أن علمة الصح مختارة بجانب
Cydia
ثم إظغط على Next.
كيفية فك الحماية لجهاز الآيفون على إصدار٣.٠ بإستخدام برنامج الرد سنو ((الماك))

الخطوة الثامنة
قم بربط جهازالآيفون بالكمبيوتر مع التأكد أنه مغلق ثم إظغط على زر
Next
كيفية فك الحماية لجهاز الآيفون على إصدار٣.٠ بإستخدام برنامج الرد سنو ((الماك))

الخطوة التاسعة
برنامج الرد سنو الآن سيرشدك إلى العديد من الخطواتلنظام الDFU .
لقراءة المزيد عن نظام الـ DFU الرجاء إتبع الرابط التالي
here
كيفية فك الحماية لجهاز الآيفون على إصدار٣.٠ بإستخدام برنامج الرد سنو ((الماك))

إظغط بإستمرارعلى زر
Home و Power
لمدة ١٠ثواني
كيفية فك الحماية لجهاز الآيفون على إصدار٣.٠ بإستخدام برنامج الرد سنو ((الماك))

أترك زر
Power
وإستمر بالظغط على زر
Home حتى يتمكن برنامج الردسنو من إيجاد جهازك

كيفية فك الحماية لجهاز الآيفون على إصدار٣.٠ بإستخدام برنامج الرد سنو ((الماك))

الخطوة العاشرة
الآن جهازك سيقوم بإعادة التشغيل ذاتيا
كيفية فك الحماية لجهاز الآيفون على إصدار٣.٠ بإستخدام برنامج الرد سنو ((الماك))

الخطوة١١
سيقوم برنامج الرد سنوالآن بتحميل قرص الـ RAM.
كيفية فك الحماية لجهاز الآيفون على إصدار٣.٠ بإستخدام برنامج الرد سنو ((الماك))

الخطوة١٢
عندما تنتهي هذه العملية , سيقوم برنامج الرد سنو بإخبارك بأنه إنتهى.
إظغط على أيقونة Finish .
عندما يقوم الآيفون بإعادة التشغيل خلال ٥دقائق تقريبا.
سيكون إن شاء الله بعدها مفكوك الحماية وستجد على الشاشة الرئيسية برنامج السيديا.
كيفية فك الحماية لجهاز الآيفون على إصدار٣.٠ بإستخدام برنامج الرد سنو ((الماك))

Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (170)
You must login or register to add a comment...
frustrated
frustrated - January 7, 2010 at 8:46pm
Do I really need to restore my phone for this to work? I followed every single step except for that one, it took about 10 minutes for my phone to reboot, I didn't have any problems, but after the reboot my phone turned back on and it's as if I never jailbroke it. Nothing changed my phone is completely normal what is this jailbreak thing supposed to be like? What did I do wring?
OMAR
OMAR - October 10, 2009 at 7:28pm
PLZ HELP,,,, after i JB my iphone, i sync all my app again to my iphone but the problem is that all of apps are not working,, so what shall i do??? i want to use my apps again please..
Gorthi
Gorthi - March 18, 2012 at 7:45am
Magnificent items from you, man. I have take into account your stuff prior to and you are smlipy too wonderful. I really like what you've acquired right here, certainly like what you are stating and the way in which by which you are saying it. You're making it entertaining and you continue to care for to stay it wise. I can't wait to read far more from you. That is really a tremendous web site.Very great post. I just stumbled upon your blog and wished to say that I have truly loved surfing around your weblog posts. In any case I will be subscribing in your rss feed and I'm hoping you write once more very soon!
Herve Bronnimann
Herve Bronnimann - October 8, 2009 at 9:09am
Guys: thanks for all the trouble but your redsnow app does not recognize the 3.0.1_7A400 ipsw, and it takes forever(!) to restore the backup which you have to do in order to re-restore to the 3.0_7A341. This adds to the insecurity of the whole enterprise, I'm getting really queasy feelings now...
Herve Bronnimann
Herve Bronnimann - October 10, 2009 at 10:06pm
Happy to report that after restoring my iPhone and restarting the process with the 3.0_7A34.ipsw image, it all worked fine. As someone noted, it got stuck (for more than 15 mins) in the reboot process, but uplugging and plugging back into the USB unstuck the process. It took about 1hr+ to restore the entire iphone after that (simply restore to the previous backup in iTunes) and I was jailbroken and back to my former data. A very happy customer! I was able to VoIP on skype to France for 15 mins for less than 55 cents. Thank you guys!
Visible ink
Visible ink - October 7, 2009 at 7:25pm
I believe the firmware for the iPhone 3g link is incorrect... it links to iPhone2,1_3.0.1_7A400_Restore.ipsw for the iPhone 3GS it should be iPhone1,2_3.0.1_7A400_Restore.ipsw correct?
jose
jose - October 3, 2009 at 1:58am
i download the ipsw but a bunch of files are in the folder. i cant select any and it dont look like the box ipsw please help!!!!!!!!
Jay
Jay - October 3, 2009 at 1:47am
Please somebody answer me!!!! Can I use this tutorial to jailbreak and then unlock my iphone? I just bought new iphone 3g(at&t carrier) firmware 2.2.1 modem 02.30.03. I really need to know because I already made useless my last iphone so I don't want to do the same with new one.
Jay
Jay - October 3, 2009 at 12:46am
Hi! If I'll do jailbreak from this tutorial will it make my baseband 04.26.08 which I can use to unlock my iPhone 3g firmware 2.2.1 modem 02.30.03 bootloader 6.02 ?
millca
millca - September 28, 2009 at 10:56pm
I'm purchasing a refurbed, unactivated iPhone 3G from ebay. I do not know what version of the OS it already has installed on it. IF it already has 3.1 installed on it, will I be able to unlock and jailbreak it to T-Mobile?
DAX
DAX - September 29, 2009 at 12:30am
if it comes with anything higher than the 3.0.1 at this time...jailbreak yes.......but unlock no.. enjoy
millca
millca - September 29, 2009 at 12:41am
That's certainly GREAT to know -- I'm glad I lost that last ebay bid then. Okay, so my #1 question to any ebay or craigslist iPhone 3G seller should be: What version of the OS is currently on it? If they have already upgraded to the latest 3.1, then I should avoid it, correct? I only have T-Mobile so I must get an iPhone that is unlockable. If they are already selling an unlocked 3G iPhone, then I should be good to go, correct? Do I need to ask them HOW they unlocked/jailbreaked it?
DAX
DAX - September 21, 2009 at 12:13am
3G w/ 3.0.1 Using Mac Book Pro Yes....if you got stuck in the rebooting part...unplug the usb and plug it again..it will work nicely....I;ve am doing it right now...phone still installing the bundles,,,,, I had to use the A341 restore ..not the A400 restore,,,,,Red Sn0w would not recognize it....... And yes, it also sync'ed all my data without asking if it was a new phone or not..... Thank you guys.....all you have ti fix is the glitch that the red snow nos the Panage tool recognized the A400 restore you download form the iClarified or the mirror sites...but it works perfectly...not to unlock the Phone!!!!!!!!!!!!!!!
Chris Diamond
Chris Diamond - November 7, 2009 at 8:30am
Excellent advice. Thanks so much!
K
K - September 16, 2009 at 9:02am
I've got an iPhone 3GS 32GB which came out of the box with 3.0.1 I've just used Redsn0w 0.8 to jailbreak. Used the 3.0 firmware and it worked absolutely fine. I followed the YouTube video from iPhoneinCanada (video 17pv60vVuh0). My phone had not previously been jailbroken. Hope this helps someone. I spent the last hours reading through comments and eventually decided to bite the bullet. Won't pretend I wasn't nervous... Good luck.
DAX
DAX - September 29, 2009 at 12:34am
hi K, but did you unlock it....I agree with you ...yes it works perfectly on the JB..but according to my not expert results...it did not work for the 3.0.1 unlock...had to downgrade it to 3.0 and then do the unlock.
K
K - September 29, 2009 at 1:28am
I haven't unlocked it. Sorry I can't be of more help.
alex
alex - September 13, 2009 at 4:35pm
Hi, I've just succesfully jailbroken my iphone, though I seem to receive no signal... Annyone?
Shaun
Shaun - September 11, 2009 at 10:21pm
Hi, I'm having the "unable to recognize specified ipsw. I've read all the posts here and noone has yet solved the problem. Can anyone help?? I've tried doing it many times already. i've tried with both restores.
alex
alex - September 13, 2009 at 11:07am
you should load the 3.0 file even if you've installed 3.0.1
boufenache
boufenache - September 13, 2009 at 12:09pm
comment instaler cydia sur mon iphone
Shaun
Shaun - September 14, 2009 at 12:50pm
Hi, Yes, I tried using both the 3.0 and the 3.0.1 versions already. All had the same result. unable to recognize specified ipsw. Anyway, I jailbreaked it successfully using pwnagetool.
kyle
kyle - September 20, 2009 at 11:29pm
same problem man i am going to try the pwnge tool too thanks
jason
jason - September 11, 2009 at 2:23pm
i think i jailbroke my phone but once its done loading jailbreak software i dont see cyndia on my phone. can anyone tell me why
Mr P
Mr P - September 6, 2009 at 11:38am
I just jailbroke my iphone 3G. Anyways I cannot connect to a Wifi Network cos it doesn't find any! I also typed in the SSID and the password but it just cannot find the wifi! Also, I did the reset thing and still it doesn't find a network! what should I do? is there a wifi fix?
Priyanshu Patel
Priyanshu Patel - September 21, 2009 at 11:10am
judt restore again woth A4000 bundle, it will work fine.
GJM3
GJM3 - September 3, 2009 at 1:59pm
Excellent site. I've now jailbroken my iPhone 3 times and have found no problems EXCEPT I've lost my visual voicemail. Is this common with anyone. I've done the reset network thing and its never worked, but thought someone would know about the VVM problems... By the way, doing a restore does un-jailbrake your phone and will restore the VVM (make sure you shut down all the way). It'll take your through the VVM set up, but everything will still be there. good luck and thanks for any help. (Jail broke on SnowLepoard.
Ny
Ny - September 3, 2009 at 10:32am
So got the 3g all unlocked and everything goes well except after the unlock I only have sound through the headphones or the speaker phone if the headphones are not plugged it. Any Ideas????
Justin Ferk
Justin Ferk - September 2, 2009 at 5:50pm
I have an ipHONE 3g and I'm following the steps. I have made it to the reboot but my phone is frozen white. What do I to get past this ? MAC - SNOW LEOPARD - 3G 16 gig
Beil
Beil - September 2, 2009 at 10:31pm
Try unplugging the iPhone's USB cable for 3 seconds and then plugging it back in. That should get the process going again.
Dii
Dii - September 9, 2009 at 5:19pm
I had to unplug it and plug it back in as well. It sounds counter intuitive, but it worked.
Priyanshu Patel
Priyanshu Patel - September 21, 2009 at 11:11am
unplug the cable and plug it again. will recon the iphone and start the process from there itself.
M
M - September 2, 2009 at 4:20am
Hey when you upgrade to 3.0.1 and then unlock ... do you keep all your contacts etc etc? Thanks
Beil
Beil - September 2, 2009 at 10:35pm
If, when asked, you restore from the back up made, then yes, your contacts, photos, notes etc should be returned to your phone.
cytokine
cytokine - August 30, 2009 at 9:00am
AS PER CYDIA: Users jailbreaking iPhoneOS 3.0.1 with redsn0w 0.8 will need to select a 3.0 IPSW (3.0.1 is close enough to 3.0). And if your iphone hangs when it says "waiting for reboot" on redsn0w, simply take the usb from the iphone out and plug it back in.
Sujan
Sujan - August 31, 2009 at 9:18am
The screen freezes in waiting for reboot and unplug-plug does not work. Any more ideas? Would be grateful. Using Vista 32-bit running redsn0w as admin.
chris
chris - August 24, 2009 at 10:09pm
Anyone else having issues with resn0w not being able to verify the .ipsw file?
william wilson
william wilson - August 25, 2009 at 9:10am
commented
S John
S John - August 26, 2009 at 12:27am
Having same problem, what to do? Cannot verify IPS
Y
Y - August 29, 2009 at 12:56pm
having same issue of not recognizing - any help?
Beil
Beil - September 2, 2009 at 10:37pm
Which .ipsw are you using for the redsn0w verification step? If you're using the 3.0.1 one that you first restored with, it won't work. You will need to use the 3.0 file that is also referred to at the top of the tutorial.
Shaun
Shaun - September 11, 2009 at 12:48am
I've tried doing that, but it still could not recognise.
More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Sonoma
AppleTV Firmware Download Locations
Where to Download macOS Ventura
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS