April 20, 2024
iPhone Dev-Team Lanseaza Untethered Jailbreak pentru iOS 4.3.1

iPhone Dev-Team Lanseaza Untethered Jailbreak pentru iOS 4.3.1

Posted April 4, 2011 at 4:48am by iClarified
EnglishIndonesianItalianPortuguesePortuguese (Brazil)RomanianSpanishTurkish
iPhone Dev-Team a lansat un untethered jailbreak pentru iOS 4.3.1. Acest jailbreak suporta metoda untether dezvoltata de i0n1c.

Exploit-ul pentru 4.3.1 (untether) a fost lansat datorita lui Stefan Esser (@i0n1c pe twitter), un cercetator in securitate din Germania. Stefan si-a dezvoltat o reputatie in cercetarea vulnerabilitatilor, si oarecum ironic prima sa contributie pentru comunitatea iPhone jailbreak a fost o implementare pentru imbunatatirea securitatii — anul trecut a dat o lovitura Apple prin implementarea ASLR pentru iPhone-urile cu Jailbreak cu framework-ul sau "antid0te". Suntem fericiti sa vedem ca Stefan si-a indreptat atentia catre un exploit pentru iPhone cu untethered jailbreak!

Echipamentele Apple suportate sunt in acest moment iPhone 4, iPhone 3GS, iPod touch 4G, iPod touch 3G, iPad 1 si Apple TV 2. iPad 2 nu este suportat pentru moment.


Puteti sa descarcati utilitarele RedSn0w sau PwnageTool pentru jailbreak. Adresele pentru descarcare sunt urmatoarele:
● RedSn0w (Windows, Mac)
● PwnageTool (Mac)

Daca inca nu stiti cum sa efectuati un jailbreak puteti urma instructiunile de mai jos:

Instructiuni RedSn0w:
● iPhone 4 (Windows, Mac)
● iPhone 3GS (Windows, Mac)
● iPod Touch 4G (Windows, Mac)
● iPod Touch 3G (Windows, Mac)
● iPad 1 (Windows, Mac)

Instructiuni PwnageTool:
● iPhone 4 (Mac)
● iPhone 3GS (Mac)


IMPORTANT: Utilizatori ai Ultrasn0w nu faceti inca actualizarea! iPhone Dev-Team doreste sa lanseze o actualizare pentru ultrasn0w pe versiune de firmware 4.3.1.

Trebuie sa lansam o actualizare pentru ultrasn0w ce repara cateva incompatibilitati cand FW 4.3.1 este utilizat impreuna cu versiuni mai vechi de basebands suportate de ultrasn0w. Tineti minte ca o data ce reparam ultrasn0w pentru 4.3.1 (o sa anuntam aici si pe twitter),trebuie sa utilizati o versiune de IPSW personalizata cu PwnageTool, Sn0wbreeze sau xpwn! Nu incercati niciodat sa faceti o restaurare sau actualizare cu versiunea originala de IPSW, sau veti pierde unlock-ul pentru SIM!


iPhone Dev-Team Lanseaza Untethered Jailbreak pentru iOS 4.3.1
Add Comment
Would you like to be notified when someone replies or adds a new comment?
Yes (All Threads)
Yes (This Thread Only)
No
iClarified Icon
Notifications
Would you like to be notified when we post a new Apple news article or tutorial?
Yes
No
Comments (89)
You must login or register to add a comment...
cokifive
cokifive - April 7, 2011 at 4:51am
hi guys, i have iphone 3 with os 4.2.1 bb 06.15.00... i used redsn0w before and update to 06.15.00 to unlock my phone. If i upgrade to os 4.3.1 and JB with new redsn0w. does it mean i will lose my carrier unlock?? do i have to do everything all over again (mean JB & unlock)> Thanks in advance
moe
moe - April 6, 2011 at 10:50pm
how long is the restore suppose to take is been restoring for the past 30 mins, can someone help please
Ahmed Irushad
Ahmed Irushad - April 6, 2011 at 5:22pm
dev team, can you please release an unlock for iphone 4 ( baseband 02.10.04 & up ) i am waiting for that almost a year, and many more are still waiting for that, i know you guys can do it, i appreciate your work & i am grateful for that...
Steve J
Steve J - April 6, 2011 at 3:49pm
hei dev team - who needs the jailbreak if 2/3 of iphone 4's are locked in some pointless network.
Chrystal
Chrystal - April 6, 2011 at 1:50pm
Hi There, I'm using redsnow to jailbreak my ipod touch 3g, I followed all the steps, but it always stop at the "uploading ramdisk" step, then the downloading jailbreak data disappears the ipod reboots and still isn't jailbroken while on my pc it is still uploading the ramdisk. Am I doing something wrong?
Wazza
Wazza - April 6, 2011 at 1:47pm
Hi there, If I toggle the vibrate switch to silent mode, the iPhone is supposed to vibrate as we all know. However, since Jailbreaking, it doesn't always vibrate, and sometimes vibrates when I switch it back to the normal position, when it shouldn't. I restored the phone to pre-jailbreak and it works fine so its definitely a software related issue. Has anyone else noticed this? What could be causing it? Everything else works fine. Thanks in advance.
Tomster88
Tomster88 - April 6, 2011 at 5:09pm
I noticed that too. I have the same issue. I also notice this jailbreak, or maybe it's 4.3.1, is making my phone sluggish.. have you noticed anything like that too?
DAJ721
DAJ721 - May 12, 2011 at 8:54pm
I have the same issue... What can I do?
Martin
Martin - April 6, 2011 at 12:09pm
Does this work on the iPhone 3G? (Says only 3Gs in the title)
Noise
Noise - April 6, 2011 at 12:36pm
It doesn't. 4.3 and 4.3.1 do don't support iPhone 3, only iPhone 3GS and iPhone 4.
Monty09
Monty09 - April 6, 2011 at 7:41am
jailbreak went perfect on ipod touch 4th gen however once in cydia and i was adding everything i always add i randomly got a white flash then it went to apple logo with loading bar but my screen with cydia was underneath...? and it let me keep using cydia so i exited and resprung the winterboard and it went a way.... just thought it was really weird. but thansk to the devs!
Mi Bear
Mi Bear - April 6, 2011 at 6:40am
I did the redsn0w/jailbreak on a iPhone 4.the jailbreak went flawlessly.I got Cydia And Internet.bb is -04.10.01 The problem is > it's not connecting to AT&T says searching or only one bar .doesn't say AT&T near the signal. Took the sim out and put it in a 3G s and worked fine.did the jb on both win 7 and xp two different laptops.tried running it as admin.slid the airplane mode off and on.IDid numerous other things. Pulling my last hair out (ouch!)any help would be appreciated.thanks!
Ynot
Ynot - April 6, 2011 at 3:46am
I also would like to thank the dev team for saving us from the restricted world of Apple :) Can you please write some info on the ipad2 jailbreak? if there is a timeline or hope for it thanks
Z!GGY
Z!GGY - April 6, 2011 at 1:58am
again the prob with the incoming international calls no name shown with missing the 0 from the start anyway good job dev
Macki
Macki - April 5, 2011 at 5:48pm
Thank You dev team for this! and of course i0n1c :) Without the jailbreaks I would never buy the Apple products, It's like the missing part:) Im still wondering why we are not getting any information on the IPad 2 jailbreak? Is Comex going to release the IPad 2 4.3 jailbreak, it couldn't be too hard for him just to twitter saying if he will, and if it's coming soon or something like that :/
Maxi
Maxi - April 5, 2011 at 8:05am
Work for 3.10.01? thank's.
coolio
coolio - April 5, 2011 at 5:42am
I had some troubles with Redsn0w jailbreaking.. so had to use the pwnage tool to make custom IPSW. But now my 3GS is up and running perfectly.. thanks dev-Team and everyone behind it.
Jay
Jay - April 5, 2011 at 12:53am
So does this mean the unlock is right around the corner for 4.3?
Rez
Rez - April 4, 2011 at 11:28pm
Just jailbroken my 3GS with new redsnow, I lost my network and Internet , any help
Steve
Steve - April 4, 2011 at 11:49pm
Me 2 , 3GS, no phone number shows in General settings,, Carrier softbank, cannot send SMS ,
Rez
Rez - April 5, 2011 at 12:29am
I couldn't access my setting menu either, tried online for a solution with no luck so I had to restore my iPhone and forget about jailbreak.
Joe N
Joe N - April 5, 2011 at 12:41am
Just JB my iphone 4 and lost Network as well. Bars are at 1. Any info?
ss ss
ss ss - April 5, 2011 at 12:47am
YEah mine is the same bars at 1 always. No Carrier, phone number, no sms on 3gs
Joe N
Joe N - April 5, 2011 at 2:51pm
So what I basically did was restore the phone back to 4.3.1 (Itunes/Tiny) and re-jailbroke it with Redsnow. Everything works perfectly now. I get my carrier back, I can make calls, sends SMS/MMS and so on. The only "bug" that I notice is that the reception bars remain @ 1. I've noticed it doesn't affect reception what so ever, just more of a "bug" that displays 1 bar.
Zeljko
Zeljko - April 5, 2011 at 5:33pm
that could be mine comment 2. cheers.
rudolf
rudolf - April 6, 2011 at 9:56am
Restored to 4.3.1 via iTunes using TinyUmbrella to keep my baseband at 01.59.00 and then JB it using Redsn0w (repeated the whole procedure twice). Signal bar shows one bar or at times no bars at all. Turning OFF an On airplane mode, 3G and Cellular settings did not help. I did not install Ultrasn0w. I keep my baseband at 01.59.00 just in case I travel abroad and want to use my cell with different carrier.
Dogter
Dogter - April 4, 2011 at 11:10pm
Just updated both my iPad 1 and iPhone 3Gs to iOS 4.3.1 and jailbroke with the info provided. So far no issues Since my phone was out of space it would not let me update my OS. Even Cydia would not let me update Cydia APPs due to lack of space. I had to do a restore install of iOS 4.3.1 and reinstall all of my APPs, settings, music, photos, ex. Doing a complete restore ended up freeing about 3 gigs of space
Dogter
Dogter - April 4, 2011 at 11:12pm
I meant 2 gigs, not 3. Typing in the dark so I hit the wrong key. After restoring and doing a clean install 4.3.1, the JB went through with no issues
Carlos de Carvalho
Carlos de Carvalho - April 4, 2011 at 10:01pm
Amazing !!!!!!!! Thanks a lot !!!! Looking foward for the ipad 2 version, any news !?!?!
Sam
Sam - April 4, 2011 at 10:20pm
It's out now!!! Just JB'd mine and it's sooo much better....or was it a dream?
Carlos de Carvalho
Carlos de Carvalho - April 4, 2011 at 10:42pm
HOW !!!!!!!!!!!!?????????
rok
rok - April 4, 2011 at 8:24pm
works fine thanks
iNo3L
iNo3L - April 4, 2011 at 3:43pm
Wanna say Thank to Dev Team for the hard work on Untethered JB on 4.3.1...did anyone had a issue after JB ur iP4 had no carrier network on PwnageTool 4.3? Then i tried JB on Redsn0w then i turn off 3g (i dont know if effect) and its work out fine.....Thanks again Dev Team for your Fabulous Piece Of Art..
asdfsd_croat
asdfsd_croat - April 5, 2011 at 3:02am
happend to me BUT then i did another restore then it worked... after RESTORING ipsw from iTunes turn on your phone, enter sim pin and wait for network to initialize...then power off and do the redsnow procedure...then it worked...first time i skipped that initialization
More Comments
Recent. Read the latest Apple News.
RECENT
Tutorials. Help is here.
TUTORIALS
Where to Download macOS Monterey
Where to Download macOS Ventura
AppleTV Firmware Download Locations
Where To Download iPad Firmware Files From
Where To Download iPhone Firmware Files From
Deals. Save on Apple devices and accessories.
DEALS